MODULAR

ph Neutre creations, modules for modular synthesizer in Eurorack format

 

- - -

 

MULTIPLE :

 

Multiple dual channels with LED indication of the selected channel : blue=channel A, green=channel B. Led off, the signal is muted

Accept all signals. Volt/octave : limited X2 for good tracking.

Several colors available to choose :

Blue/Green or Red/Green or Blue/Red or Red/Yellow

Available with white or black panel.

Price : 45€ (excluding shipping costs)

Payment by paypal, sending by "colissimo" (Europe).

 

Specifications :

Size 6HP, epoxy black panel 1,6 mm.

Deep : 25mm with connector.

PCB in epoxy FR4 dual layer, 1,6 mm. Surface finish HASL.

Components tested and assembled by hand, in Brittany, France.

Available as an assembled Module, no kit.

In the box : ribbon cable, M3 & nylon nuts.

Very low consumption : ~ 5 mA (+12V) / 0 mA (-12V).

 

MANUAL

DEMO

 

               

 

   

       

  

To order, please contact me by clicking here :

ACHETER (BUY)

The terms of payment, delivery times and shipping costs, will be detailed by return mail.
The payment will be in euros (€) and can be done by paypal. Delivery possible in Europe by colissimo. Other country, please contact me...

- Also present on & -

 

BACK

ANALOG BASS DRUM

 

Inspired by Craig ANDERTON's HBD schema (1983), this reinterpreted analog kick for eurorack format, modified and enriched, offers powerful sound and a host of possibilities.


Big percussive kick, "rounder" bass drum, through toms, this module can be redoubtable!


Very interesting to double an acoustic drum kick...


It offers many settings:


pitch, resonance, click (level and tone), impact, clipping (hard limiting) 6 positions, trig pulse width control (PW) and output attenuator (level).


Accept TRIG signal (+5v
~ +12v).

Available with White or Black panel.

Price : 70€ (excluding shipping costs)

Payment by paypal, sending by "colissimo" (Europe).

 

Specifications :

Size 8HP, epoxy white panel 1,6 mm.

Deep : 27mm with connector.

PCB in epoxy FR4 dual layer, 1,6 mm. Surface finish HASL.

Components (quality wima, alpha, thonk, panasonic... ) tested and assembled by hand, in Brittany, France.

Available as an assembled Module, no kit.

In the box : ribbon cable, M3 & nylon nuts.

Consumption : ~ 5 mA (+12V) / ~ 4 mA (-12V).

 

QUICKSTART GUIDE

MANUAL

DEMO

 

       

   

 
To order, please contact me by clicking here :

ACHETER (BUY)

The terms of payment, delivery times and shipping costs, will be detailed by return mail.
The payment will be in euros (€) and can be done by paypal. Delivery possible in Europe by colissimo. Other country, please contact me...

- Also present on & -

 

BACK

A/B ++

A/B Switch - patchbay - Multiple

 

The A/B ++ module is an utility that combines several functions into two independent parts :
In the upper part, a passive A/B switch and at the bottom, a patchbay / multiple (also passive).
It allows a lot of combinations, regarding patchbay, screen printing briefly explains the routing.

(For the presentation, all leds are visible by photo editing because in reality, leds A & B can not be activated at the same time)

Accept all signals. Volt/octave : limited X2 for good tracking.

Available with White or Black panel.

Price : 45€ (excluding shipping costs)

Payment by paypal, sending by "colissimo" (Europe).

 

Specifications :

Size 7HP, epoxy black panel 1,6 mm.

Deep : 25mm with connector.

PCB in epoxy FR4 dual layer, 1,6 mm. Surface finish HASL.

Components tested and assembled by hand, in Brittany, France.

Available as an assembled Module, no kit.

In the box : ribbon cable, M3 & nylon nuts.

Very low consumption : ~ 9 mA (+12V) / 0 mA (-12V).

 

MANUAL

 

   

   

   

To order, please contact me by clicking here :

ACHETER (BUY)

The terms of payment, delivery times and shipping costs, will be detailed by return mail.
The payment will be in euros (€) and can be done by paypal. Delivery possible in Europe by colissimo. Other country, please contact me...

- Also present on & -

 

BACK

3x ATT

Triple passive attenuator, with LIN(ear) or LOG(arithmic) selector mode

 

The 3x ATT module is a passive attenuator offering the choice of LIN(ear) mode for logic signals, or LOG(arithmic) for AUDIO signals.

It is composed of three identical and independent sections.

Accept all signals (logic = LIN or audio = LOG).

Available with black panel.

Price : 30€ (excluding shipping costs)

Payment by paypal, sending by "colissimo" (Europe).

 

Specifications :

Size 4HP, epoxy black panel 1,6 mm.

Deep : 12mm.

PCB in epoxy FR4 dual layer, 1,6 mm. Surface finish HASL.

Components tested and assembled by hand, in Brittany, France.

Available as an assembled Module, no kit.

In the box : M3 & nylon nuts.

No consumption (passive module).

 

MANUAL

 

   

   

To order, please contact me by clicking here :

ACHETER (BUY)

The terms of payment, delivery times and shipping costs, will be detailed by return mail.
The payment will be in euros (€) and can be done by paypal. Delivery possible in Europe by colissimo. Other country, please contact me...

- Also present on & -

 

BACK

____________________________________________________________________

Copyright © ph.neutre.free.fr  2002 -  Contacter le webmaster